{"product_id":"product-8705331","title":"GM110-10 Gimbal Motor w\/Encoder","description":"Description   \u003cp\u003e The AS5048 is an easy-to-use 360° angle position sensor with a 14-bit high-resolution output. The maximum system accuracy is 0.05° assuming linearization and averaging is done by the external microcontroller. The IC measures the absolute position of the magnet’s rotation angle and consists of Hall sensors, the analog-digital converter, and digital signal processing. The zero position can be programmed via SPI or IC command. Therefore no programmer is needed anymore. This simplifies the assembly of the complete system because the zero position of the magnet does not need to be mechanically aligned. This helps developers to shorten their developing time. The sensor tolerates misalignment, air gap variations, temperature variations and as well as external magnetic fields. This robustness and wide temperature range (-40°C up to +150°C) of the AS5048 makes the IC ideal for rotation angle sensing in harsh industrial and medical environments. Several AS5048 ICs can be connected in the daisy chain for serial data read out. The absolute position information of the magnet is directly accessible over a PWM output and can be read out over a standard SPI or a high-speed IC interface. Version AS5048A comes with SPI and PWM Interface. Version AS5048B is configured with the IC interface and has also a PWM output. An internal voltage regulator allows the AS5048 to operate at either 3.3 V or 5 V supplies. \u003cbr\u003e \u003cbr\u003e It is specially designed for iPower Motor GBM5208 GBM6208 GBM6212 GBM8017 GBM8028 GBM8108 GBM110 Motor, Please note that there should be screw holes on the gimbal motor to fit the metal mounting plate, otherwise you'll need to DIY to mount. The dimension of the aluminum alloy part is shown below. \u003cbr\u003e \u003c\/p\u003e     Features   \u003cp\u003e 360° contactless angle position sensor \u003c\/p\u003e \u003cp\u003e Standard SPI or high speed IC interface and PWM \u003c\/p\u003e \u003cp\u003e Simple programmable zero position via SPI or IC command \u003c\/p\u003e \u003cp\u003e No programmer needed \u003c\/p\u003e \u003cp\u003e 14-bit full scale resolution 0.0219°\/LSB \u003c\/p\u003e \u003cp\u003e Angle accuracy 0.05°after system linearization and averaging \u003c\/p\u003e \u003cp\u003e Daisy chain capability \u003c\/p\u003e \u003cp\u003e Tolerant to air gap variations magnetic field input range: 30mT – 70mT \u003c\/p\u003e \u003cp\u003e -40°C to +150°C ambient temperature range \u003c\/p\u003e \u003cp\u003e 3.3V \/ 5V compliant \u003c\/p\u003e \u003cp\u003e 14-pin TSSOP package (5x6.4mm) \u003c\/p\u003e \u003cp\u003e Magnets size 6mm x 2.5mm \u003c\/p\u003e \u003cp\u003e The principle of the camera stabilization using brushless direct-drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo. \u003c\/p\u003e \u003cp\u003e Specially designed for SLR aerial and Z-axis DIY Parts \u003c\/p\u003e \u003cp\u003e Sealed Case to prevent contamination by dust and dirt. \u003c\/p\u003e \u003cp\u003e Hollow shaft for slipring \u003c\/p\u003e \u003cp\u003e Configuration: 36N42P ,prove more torque. \u003cbr\u003e \u003c\/p\u003e     Specifications   \u003cp\u003e Model: GM110-10 \u003c\/p\u003e \u003cp\u003e Motor Out Diameter: Ф110±0.05mm \u003c\/p\u003e \u003cp\u003e Configuration: 36N\/42P \u003cbr\u003e \u003c\/p\u003e \u003cp\u003e Motor Height: 33.4±0.2mm (Included with Encoder housing) \u003c\/p\u003e \u003cp\u003e Hollow Shaft(OD): Ф25-0.008\/-0.012 mm \u003c\/p\u003e \u003cp\u003e Hollow Shaft(ID): Ф22+0.05\/+0.1 mm \u003c\/p\u003e \u003cp\u003e Wire Length: 610±3mm \u003c\/p\u003e \u003cp\u003e Cable AWG: #24 \u003c\/p\u003e \u003cp\u003e Motor Weight: 556±1g \u003c\/p\u003e \u003cp\u003e Wire plug: 2.5mm dupont connector \u003c\/p\u003e \u003cp\u003e No-load current: 0.16±0.1 A \u003c\/p\u003e \u003cp\u003e No-load volts: 20 V \u003c\/p\u003e \u003cp\u003e No-load Rpm: 292~323 RPM \u003c\/p\u003e \u003cp\u003e Load current: 2 A \u003c\/p\u003e \u003cp\u003e Load volts: 20 V \u003c\/p\u003e \u003cp\u003e Load torque(g·cm): 9000-15000 \u003c\/p\u003e \u003cp\u003e Motor internal resistance: 4.16Ω±5%（Resistance varies with temperature） \u003c\/p\u003e \u003cp\u003e High voltage test: DC500V 1mA @2sec \u003c\/p\u003e \u003cp\u003e Rotor housing runout: ≤0.1mm \u003c\/p\u003e \u003cp\u003e Steering (axle extension): clockwise \u003c\/p\u003e \u003cp\u003e High-low temperature test: \u003c\/p\u003e \u003cp\u003e High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature \u003c\/p\u003e \u003cp\u003e Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature \u003c\/p\u003e \u003cp\u003e Maximum power: ≤80W \u003c\/p\u003e \u003cp\u003e Working current: 4-6S \u003c\/p\u003e \u003cp\u003e Working temperature: -20~60℃;10~90%RH \u003c\/p\u003e     Package List   \u003cp\u003e 1 x GM110-10 brushless gimbal motor \u003c\/p\u003e \u003cp\u003e 1 x AS5048A Encoder with aluminum case \u003cbr\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e         ","brand":"Stefanie Bregman","offers":[{"title":"Default","offer_id":67795474546784,"sku":"22649424-19245-31740-149816-0-0-0-0","price":99.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2146\/2880\/files\/kf-a47cc69aebd78e3348dacb2148cf8120.png?v=1794838183","url":"https:\/\/f12tac-gt.myshopify.com\/products\/product-8705331","provider":"Stefanie Bregman","version":"1.0","type":"link"}