{"product_id":"product-8705208","title":"GM5208-12 Encoder Combo Set","description":"Description   \u003cp\u003e Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency. \u003c\/p\u003e \u003cp\u003e \u003cb\u003e What's encoder technology in brushless gimbal control system? \u003c\/b\u003e \u003c\/p\u003e \u003cp\u003e The 3 axis stabilization gimbal system that relies on both active motor-driven components and passive inertial stabilization. Passive stabilization relies on the principles of inertia (tendency of an object to resist change in its motion) and requires that the camera is well-balanced in the Pan, Tilt, and Roll Axes. Active stabilization refers to the techniques of using sensors to measure the camera’s Pan, Tilt, and Roll movements and counteract those movements using motors attached to the 3 axes. \u003c\/p\u003e     Features   \u003cp\u003e Easy to do gimbal tuning, no need to do much calibration work any more. \u003c\/p\u003e \u003cp\u003e Power saving, 5 times long working time than gimbal without encoder system. \u003c\/p\u003e \u003cp\u003e Twin IMUs. \u003c\/p\u003e \u003cp\u003e Faster response, motor torque increasing instantly, no bug for difficult rotating angle any more. \u003c\/p\u003e \u003cp\u003e Encoder chip AS5048A \u003c\/p\u003e     Specifications   \u003cp\u003e Model: GM5208 \u003c\/p\u003e \u003cp\u003e Motor Out Diameter: Ф63±0.05mm \u003c\/p\u003e \u003cp\u003e Configuration: 12N\/14P \u003cbr\u003e \u003c\/p\u003e \u003cp\u003e Motor Height: 30.7±0.2mm (Included with Encoder housing) \u003c\/p\u003e \u003cp\u003e Hollow Shaft(OD): Ф15-0.008\/-0.012 mm \u003c\/p\u003e \u003cp\u003e Hollow Shaft(ID): Ф12+0.05\/0 mm \u003c\/p\u003e \u003cp\u003e Wire Length: 610±3mm \u003c\/p\u003e \u003cp\u003e Cable AWG: #24 \u003c\/p\u003e \u003cp\u003e Motor Weight: 209±0.5g \u003c\/p\u003e \u003cp\u003e Wire plug: 2.5mm dupont connector \u003c\/p\u003e \u003cp\u003e No-load current: 0.09±0.1 A \u003c\/p\u003e \u003cp\u003e No-load volts: 20V \u003c\/p\u003e \u003cp\u003e No-load Rpm: 456~504 RPM \u003c\/p\u003e \u003cp\u003e Load current: 1A \u003c\/p\u003e \u003cp\u003e Load volts: 20V \u003c\/p\u003e \u003cp\u003e Load torque(g): 1800-2500 \u003c\/p\u003e \u003cp\u003e Motor internal resistance: 15.2Ω±5%（Resistance varies with temperature） \u003c\/p\u003e \u003cp\u003e High voltage test: DC500V 10mA @1sec \u003c\/p\u003e \u003cp\u003e Rotor housing runout: ≤0.1mm \u003c\/p\u003e \u003cp\u003e Steering (axle extension): clockwise \u003c\/p\u003e \u003cp\u003e High-low temperature test: \u003c\/p\u003e \u003cp\u003e High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature \u003c\/p\u003e \u003cp\u003e Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature \u003c\/p\u003e \u003cp\u003e Maximum power: ≤40W \u003c\/p\u003e \u003cp\u003e Working Voltage: 3-5S \u003c\/p\u003e \u003cp\u003e Working temperature: -20~60℃;10~90%RH \u003c\/p\u003e     Packing List   \u003cp\u003e 3 x GM5208-12 Gimbal Motor with AS5048A Encoder \u0026amp; Magnet \u003c\/p\u003e \u003cp\u003e 1 x Alexmos 32BIT BGC Board Encoder version without alum case \u003c\/p\u003e \u003cp\u003e 1 x Connecting cables set \u003c\/p\u003e         ","brand":"Stefanie Bregman","offers":[{"title":"Default","offer_id":67794903859296,"sku":"22649194-19189-31684-149760-0-0-0-0","price":99.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/2146\/2880\/files\/kf-a6a2951ce3617a43ea25cec5fbf9147b.png?v=1794837986","url":"https:\/\/f12tac-gt.myshopify.com\/products\/product-8705208","provider":"Stefanie Bregman","version":"1.0","type":"link"}